Pantech caper Guida Utente

02
03
04
05
06
07

01

2

This chapter addresses and explains the basic features  
for CAPER

TM

 including:

Turning the Phone On/Off
Accessing the Menu
Quick Switching Between the Main Menus
Menu Summary
Making a Call
Answering Calls
Missed Call Notification
Pause/Wait Feature
Making an International Call
3-Way Calling

Call Waiting Function
Calling a Number from Contacts
Adjusting Volume
Caller ID Function
Vibrate Mode
Speakerphone Mode
Using Auto Keypad Lock Function
Available Options During a Call
Making an Emergency Call
Dialing Letters

1.  Press and hold the END Key   until the display turns on.

   •   If “

ENTER LOCK CODE

” appears on the display, press the OK Key to unlock the keypad, 

and enter your 4-digit lock code. 

  •   The default lock code is the last 4 digits of your phone number. 

1.   Press the OK Key to unlock the keypad, then press and hold the END Key   

until your display turns off.

    •   Immediately change or recharge the battery when “

BATTERY LOW

” appears on the 

display. Memory may possibly be damaged if the phone turns off due to the battery 
completely draining.

  •   Turn the phone off before removing or replacing the battery. If the phone is on, 

unsaved data may be lost.

Your phone can be customized via the menu. Each function can be accessed by pressing 
the Directional Key 

 or by pressing the number that corresponds with the menu 

item.

1.   Press the OK Key 

 [

].

2.   To scroll through the menu, press the Directional Key 

 

up or down or press 

the number that corresponds to the desired menu item.

3.   To return to the previous page, press the CLR Key 

. To exit the current 

menu and return to from the home screen, press the END Key  .

4.   From the home screen, press the OK Key to unlock the keypad, then press the 

Left Soft Key 

 [

] to open the Messages menu or press the Right 

Soft Key 

 [

] to open your Contact List.

   This manual assumes that 

Display Themes

 is set to 

Amoled

, and 

Menu Layout

 is set to 

List

, which are the default settings.