Alcatel-Lucent 6850-48 Guida Di Rete
Remote Monitoring (RMON) Overview
Diagnosing Switch Problems
page 45-10
OmniSwitch AOS Release 6 Network Configuration Guide
September 2009
Remote Monitoring (RMON) Overview
The following sections detail the specifications, defaults, and quick set up steps for the RMON feature.
Detailed procedures are found in
Detailed procedures are found in
.
RMON Specifications
RFCs Supported
2819 - Remote Network Monitoring
Management Information Base
Platforms Supported
OmniSwitch 6400, 6800, 6850, 6855, and 9000
RMON Functionality Supported
Basic RMON 4 group implementation
–Ethernet Statistics group
–History (Control and Statistics) group
–Alarms group
–Events group
–Ethernet Statistics group
–History (Control and Statistics) group
–Alarms group
–Events group
RMON Functionality Not Supported
RMON 10 group*
RMON2*
–Host group
–HostTopN group
–Matrix group
–Filter group
–Packet Capture group
(*An external RMON probe that includes
RMON 10 group and RMON2 may be used
where full RMON probe functionality is
required.)
RMON2*
–Host group
–HostTopN group
–Matrix group
–Filter group
–Packet Capture group
(*An external RMON probe that includes
RMON 10 group and RMON2 may be used
where full RMON probe functionality is
required.)
Flavor (Probe Type)
Ethernet/History/Alarm
Status
Active/Creating/Inactive
History Control Interval (seconds)
1 to 3600
History Sample Index Range
1 to 65535
Alarm Interval (seconds)
1 to 2147483647
Alarm Startup Alarm
Rising Alarm/Falling Alarm/
RisingOrFalling Alarm
RisingOrFalling Alarm
Alarm Sample Type
Delta Value/Absolute
RMON Traps Supported
RisingAlarm/FallingAlarm
These traps are generated whenever an Alarm
entry crosses either its Rising Threshold or its
Falling Threshold and generates an event con-
figured for sending SNMP traps.
These traps are generated whenever an Alarm
entry crosses either its Rising Threshold or its
Falling Threshold and generates an event con-
figured for sending SNMP traps.