Manualsbrain.com
  1. Manuali
  2. Marche
  3. Alcatel-Lucent
  4. 6850-48
  5. Guida Di Riferimento

Alcatel-Lucent 6850-48 Guida Di Riferimento

Scarica
Pagina di 3444
MPLS Static LSP and FRR Commands
OmniSwitch CLI Reference Guide
September 2009
page 25-33
show router mpls static-lsp
Displays static Label Switched Path (LSP) information.
show router mpls static-lsp [lsp-name | transit | terminate | count] 
Syntax Definitions
lsp-name
The name of an existing LSP.
transit
Displays transit information for static LSPs.
terminate
Displays endpoint information for static LSPs.
count
Displays the total number of static LSPs.
Defaults
By default, information for all static LSPs is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the command parameters provided to display information for a specific static LSP or to provide a 
count of the number of static LSPs.
Examples
-> show router mpls static-lsp
MPLS Static LSPs (Originating)
LSP Name       To            Next Hop    Out Label    Up/Down Time   Adm   Opr           
 ID                                     Out Port                                   
------------+---------------+---------------+---------+--------------+----+----
lsp-1       10.1.1.4      20.20.20.1*     734       0d 05:56:45    Up    Up  
 1                                        n/a
lsp-2       10.11.0.6     20.20.20.1*     750       0d 05:56:45    Up    Up  
  2                                                                     n/a                                                                      
lsp-3        5.5.5.5      20.20.20.1*     750       0d 05:56:45    Up    Up  
 3                                                                      n/a                                                                      
                                       
LSPs : 3