Alcatel-Lucent 6850-48 参照ガイド
MPLS Static LSP and FRR Commands
OmniSwitch CLI Reference Guide
September 2009
page 25-33
show router mpls static-lsp
Displays static Label Switched Path (LSP) information.
show router mpls static-lsp [lsp-name | transit | terminate | count]
Syntax Definitions
lsp-name
The name of an existing LSP.
transit
Displays transit information for static LSPs.
terminate
Displays endpoint information for static LSPs.
count
Displays the total number of static LSPs.
Defaults
By default, information for all static LSPs is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Use the command parameters provided to display information for a specific static LSP or to provide a
count of the number of static LSPs.
count of the number of static LSPs.
Examples
-> show router mpls static-lsp
MPLS Static LSPs (Originating)
LSP Name To Next Hop Out Label Up/Down Time Adm Opr
ID Out Port
------------+---------------+---------------+---------+--------------+----+----
lsp-1 10.1.1.4 20.20.20.1* 734 0d 05:56:45 Up Up
1 n/a
lsp-2 10.11.0.6 20.20.20.1* 750 0d 05:56:45 Up Up
2 n/a
lsp-3 5.5.5.5 20.20.20.1* 750 0d 05:56:45 Up Up
3 n/a
LSPs : 3