Alcatel-Lucent 6850-48 Guida Di Riferimento
Chassis Management and Monitoring Commands
page 2-44
OmniSwitch CLI Reference Guide
September 2009
show module long
Displays the detailed information for either a specified module or all the modules installed in a standalone
switch chassis or a stack. Modules include switches performing the primary and secondary CMM roles
and Network Interface (NI) in a stack.
switch chassis or a stack. Modules include switches performing the primary and secondary CMM roles
and Network Interface (NI) in a stack.
show module long [number]
Syntax Definitions
number
The slot number for a specific module installed in a standalone switch
chassis or the switch number within a stack. If no slot number is speci-
fied, detailed information for all the modules is displayed.
chassis or the switch number within a stack. If no slot number is speci-
fied, detailed information for all the modules is displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E.
Usage Guidelines
• When a module with a daughter board is viewed using the show module long command
(e.g., an OS9-GNI-C24 module provides 24 10/100/1000 BaseT auto-sensing twisted-pair ports),
information for the daughter board is also displayed.
information for the daughter board is also displayed.
• When a particular NI module is specified in the command line, output is the same as that of the
command.
This command may be used when logged into the switch that performs either the primary or secondary
CMM role in a stack.
CMM role in a stack.
Examples
-> show module long
CMM in slot 1
Model Name: OS6850-U24,
Description: 10/100/1000,
Part Number: 902271-10,
Hardware Revision: 002,
Serial Number: E23L9059,
Manufacture Date: JUN 08 2004,
Firmware Version: N/A,
Admin Status: POWER ON,
Operational Status: UP,
Power Consumption: 0,
Power Control Checksum: 0x0,
MAC Address: 00:d0:95:a3:e5:09,
Module in slot 1
Model Name: OS6850-U24,
Description: 10/100/1000,