Alcatel-Lucent 6850-48 Guida Di Riferimento

Chassis Management and Monitoring Commands

page 2-46

OmniSwitch CLI Reference Guide

Displays the basic status information for either a specified module or all modules installed in a standalone 
switch chassis or a stack. Modules include switches performing the primary and secondary CMM roles 
and Network Interface (NI) in a stack.

show module status [number]

The slot number for a specific module installed in a standalone switch 
chassis or the switch number within a stack. If no slot number is speci-
fied, status information for all modules is displayed.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E.

This command may be used when logged into the switch that performs either as the primary or secondary 
CMM role in a stack.

-> show module status

       Operational                Firmware

Slot     Status      Admin-Status   Rev           MAC

------+-------------+------------+---------+-----------------

CMM-1    UP           POWER ON      N/A     00:d0:95:a3:e5:09

NI-1     UP           POWER ON      N/A     00:d0:95:a3:e5:0b

The chassis slot position of the module. For detailed slot numbering 
information, refer to the “Chassis and Power Supplies” chapter of the 
Hardware User Guide. Refer to 

 for additional information 

on CMM callouts. 

The operational status of the module. Options include UP or DOWN. 
For NI and secondary CMM modules, the operational status can be 
DOWN while the power status is on, indicating a possible software 
issue.

The current power status of the module. Options include POWER ON 
or POWER OFF.