Alcatel-Lucent 6850-48 Guida Di Riferimento
LINK OAM Commands
OmniSwitch CLI Reference Guide
September 2009
page 29-11
efm-oam port remote-loopback
Specifies whether loopback requests from peers are processed or ignored on the specified port.
efm-oam port slot/port[-port2] remote-loopback {process | ignore}
Syntax Definitions
slot/port
The slot number for the module and the physical port number on that
module (e.g. 3/1 specifies port 1 on slot 3).
module (e.g. 3/1 specifies port 1 on slot 3).
-port2
Specifies the last port in the range of ports.
process
Processes incoming loopback request from peer LINK OAM port.
ignore
Ignore (discard) incoming loopback requests.
Defaults
By default, the incoming loopback requests are ignored.
Platforms Supported
OmniSwitch 6400, 6850, 6855.
Usage Guidelines
• When the remote-loopback is in process mode, the session started by peer LINK OAM client will be
processed by local LINK OAM port. As a result, remote port will be in remote-loopback state and the
local port will be local-loopback state.
local port will be local-loopback state.
• When the remote-loopback is in ignore mode, the session started by peer LINK OAM will not be
processed by the local port.
Examples
-> efm-oam port 1/1 remote-loopback process
-> efm-oam port 1/1 remote-loopback ignore
-> efm-oam port 2/1-10 remote-loopback process
-> efm-oam port 2/1-4 remote-loopback ignore
Release History
Release 6.4.2; command was introduced.