Alcatel-Lucent 6850-48 参考指南

LINK OAM Commands

OmniSwitch CLI Reference Guide

page 29-11

Specifies whether loopback requests from peers are processed or ignored on the specified port.

efm-oam port slot/port[-port2] remote-loopback {process | ignore}

The slot number for the module and the physical port number on that 
module (e.g. 3/1 specifies port 1 on slot 3).

Specifies the last port in the range of ports. 

Processes incoming loopback request from peer LINK OAM port.

Ignore (discard) incoming loopback requests.

By default, the incoming loopback requests are ignored.

OmniSwitch 6400, 6850, 6855.

• When the remote-loopback is in process mode, the session started by peer LINK OAM client will be 

processed by local LINK OAM port. As a result, remote port will be in remote-loopback state and the 
local port will be local-loopback state.

• When the remote-loopback is in ignore mode, the session started by peer LINK OAM will not be 

processed by the local port.

-> efm-oam port 1/1 remote-loopback process

-> efm-oam port 1/1 remote-loopback ignore

-> efm-oam port 2/1-10 remote-loopback process

-> efm-oam port 2/1-4 remote-loopback ignore

Release 6.4.2; command was introduced.