Alcatel-Lucent 6850-48 Guida Di Riferimento

RIP Commands

page 37-28

OmniSwitch CLI Reference Guide

Displays RIP interface status and configuration.

show ip rip interface [interface_name]

The interface name.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

Enter an IP address to view a specific interface. Enter the basic show ip rip interface command to show 
status for all interfaces.

-> show ip rip interface rip-1

Interface IP Name                       = rip-1,

Interface IP Address                    = 11.11.11.1

IP Interface Number (VLANId)            = 4,

Interface Admin status                  = enabled,

IP Interface Status                     = enabled,

Interface Config AuthType               = None,

Interface Config AuthKey Length         = 0,

Interface Config Send-Version           = v2,

Interface Config Receive-Version        = both,

Interface Config Default Metric         = 1,

Received Packets                        = 154,

Received Bad Packets                    = 0,

Received Bad Routes                     = 0,

Sent Updates                            = 8

The IP Interface name.

Interface IP address.

Interface VLAN ID number.

The RIP administrative status (enabled/disabled).

Interface status (enabled /disabled).

The type of authentication that will be used for the RIP interface (None 
or Simple).