Alcatel-Lucent 6850-48 Guida Di Riferimento
RIP Commands
page 37-30
OmniSwitch CLI Reference Guide
September 2009
show ip rip peer
Displays active RIP neighbors (peers). An active peer is a switch that has sent a RIP packet within the last
180 seconds. If a peer does not send a RIP packet (request or response) within 180 seconds, it is aged out
and will not be displayed.
180 seconds. If a peer does not send a RIP packet (request or response) within 180 seconds, it is aged out
and will not be displayed.
show ip rip peer [ip_address]
Syntax Definitions
ip_address
32-bit IP address.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
N/A
Examples
-> show ip rip peer
Total Bad Bad
xxxxxxxxxxxx
Secs since
IP Address Recvd Packets Routes Version last update
----------------+------+-------+------+-------+-----------
100.10.10.1 1 0 0 2 3
Release History
Release 6.1; command was introduced.
output definitions
IP Address
Peer IP address.
Total recvd
Total number of RIP packets received from the peer.
Bad Packets
Number of bad packets received from peer.
Bad Routes
Number of bad routes received from peer.
Version
Peer's RIP version as seen on the last packet received.
Secs since last update
Number of seconds since the last packet was received from the peer.