Alcatel-Lucent 6850-48 Guida Di Riferimento

BGP Commands

page 44-224

OmniSwitch CLI Reference Guide

Enables or disables the BGP peer status. These peers are identified by their IPv6 addresses.

ipv6 bgp neighbor ipv6_address [status {enable | disable}]

The 128-bit IPv6 address of the new BGP peer. 

enable 

Enables the BGP peer.

Disables the BGP peer.

OmniSwitch 6850, 6855, 9000, 9000E

• You should first create a BGP peer and assign it an IPv6 address using the

command before enabling the peer.

• You should configure all the BGP peer related commands before enabling a BGP peer. Once you have 

enabled the peer, it will begin sending BGP connection and route advertisement messages.

-> ipv6 bgp neighbor 2001::1 status enable

-> ipv6 bgp neighbor 2001::1 status disable

Release 6.1.5; command was introduced.

alaBgpPeer6Table

alaBgpPeer6Addr

alaBgpPeer6RowStatus

Displays the configured IPv6 BGP peers.