Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-145

Used for Policy Based Routing (PBR). Routed flows to which this action is applied will be directed to the 
IP address specified in the action regardless of whether or not a route already exists in the switch routing 
table.

policy action action_name permanent gateway ip ip_address 

policy action action_name no permanent gateway ip

The name of the action.

The destination IP address to which packets will be routed.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to remove a gateway IP address from a policy action.

• If the gateway goes down, the traffic to be routed over the gateway will be dropped.

-> policy action pbr2 permanent gateway ip 10.10.2.1

-> policy action pbr2 no permanent gateway ip

Release 6.1.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Displays information about policy actions.