Alcatel-Lucent 6850-48 Guida Di Riferimento

QoS Policy Commands

OmniSwitch CLI Reference Guide

page 53-147

Administratively disables the source port of the traffic to which this action is applied.

policy action action_name port-disable

policy action action_name no port-disable

The name of the action.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove port-disable from the policy action. 

• An SNMP trap is sent when a port is administratively disabled through a port disable action or a User-

Ports shutdown function.

• To enable a port disabled by this action, use the 

 command to administratively enable 

the port or disconnect and reconnect the port cable.

-> policy action pd01 port-disable

-> policy action pb02 no port-disable

Release 6.1.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Displays information about policy actions.