Alcatel-Lucent 6850-48 Guida Di Riferimento

File Management Commands

OmniSwitch CLI Reference Guide

page 7-43

Displays a switch text file onto the console screen. 

more [path/]file

The directory path leading to the file to be displayed. If no path is speci-
fied, the command assumes the current path.

The name of the text file to be displayed.

N/A 

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• This command displays the specified text file within the line and column parameters set with the 

 

command.

• If the specified text file contains more columns than set with the 

 command, the text will wrap to the 

next line displayed.

• If the text file contains more lines than set with the 

 command, the switch will display only the 

number of lines specified. To display more lines, press the spacebar to show another full screen, press 
Enter to show the next line, or press q to quit the display and return to the system prompt.

• This command can also be used on the secondary CMM. 

-> more config_file1

-> more flash/config_file1

-> more flash/working/config_file1

Release 6.1; command was introduced.

Specifies the number of TTY lines and columns to be displayed.