Alcatel-Lucent 6850-48 参照ガイド
File Management Commands
OmniSwitch CLI Reference Guide
September 2009
page 7-43
more
Displays a switch text file onto the console screen.
more [path/]file
Syntax Definitions
path
The directory path leading to the file to be displayed. If no path is speci-
fied, the command assumes the current path.
fied, the command assumes the current path.
file
The name of the text file to be displayed.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• This command displays the specified text file within the line and column parameters set with the
command.
• If the specified text file contains more columns than set with the
command, the text will wrap to the
next line displayed.
• If the text file contains more lines than set with the
command, the switch will display only the
number of lines specified. To display more lines, press the spacebar to show another full screen, press
Enter to show the next line, or press q to quit the display and return to the system prompt.
Enter to show the next line, or press q to quit the display and return to the system prompt.
• This command can also be used on the secondary CMM.
Examples
-> more config_file1
-> more flash/config_file1
-> more flash/working/config_file1
Release History
Release 6.1; command was introduced.
Related Commands
Specifies the number of TTY lines and columns to be displayed.