Alcatel-Lucent 6850-48 Guida Di Riferimento
Link Aggregation Commands
page 12-16
OmniSwitch CLI Reference Guide
September 2009
lacp linkagg actor system priority
Configures the priority of the dynamic aggregate group.
lacp linkagg agg_num actor system priority actor_system_priority
lacp linkagg agg_num no actor system priority
Syntax Definitions
agg_num
The number corresponding to the link aggregate group.
actor_system_priority
The priority of the switch’s dynamic aggregate group in relation to other
aggregate groups. Possible values are 0–65535.
aggregate groups. Possible values are 0–65535.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• Use the no form of this command to return the value to its default.
• Ports with the same system priority value can join the same dynamic aggregate group.
Examples
-> lacp linkagg 3 actor system priority 100
-> lacp linkagg 3 no actor system priority
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggActorSystemPriority
parameter
default
actor_system_priority
0
Creates a dynamic aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
groups.