Alcatel-Lucent 6850-48 Guida Di Riferimento
Link Aggregation Commands
OmniSwitch CLI Reference Guide
September 2009
page 12-17
lacp linkagg actor system id
Configures the MAC address of a dynamic aggregate group on the switch.
lacp linkagg agg_num actor system id actor_system_id
lacp linkagg agg_num no actor system id
Syntax Definitions
agg_num
The number corresponding to the dynamic aggregate group.
actor_system_id
The MAC address of the dynamic aggregate group on the switch in the
hexadecimal format xx:xx:xx:xx:xx:xx.
hexadecimal format xx:xx:xx:xx:xx:xx.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the no form of this command to remove an actor system ID from a dynamic aggregate group.
Examples
-> lacp linkagg 3 actor system id 00:20:da:81:d5:b0
-> lacp linkagg 3 no actor system id
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
alclnkaggAggTable
alclnkaggAggNumber
alclnkaggAggActorSystemID
parameter
default
actor_system_id
0
Creates a dynamic aggregate group.
Displays information about static and dynamic (LACP) aggregate
groups.
groups.