Alcatel-Lucent 6850-48 Guida Di Riferimento
Distributed Spanning Tree Commands
page 15-172
OmniSwitch CLI Reference Guide
September 2009
show bridge rrstp ring
Displays information for all the rings or for a specific ring that exists in the switch configuration.
show bridge rrstp ring [ring_id]
Syntax Definitions
ring_id
An existing ring ID number (1–128).
Defaults
By default displays information for all rings.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the ring_id parameter with this command to display information for a specific ring.
Examples
-> show bridge rrstp ring
RingId Vlan-Tag Ring-Port1 Ring-Port2 Ring Status
-----------+------------+---------------+--------------+---------------
2 1000 1/19 1/10 enabled
6 20 1/1 1/8 disabled
128 1 0/1 0/31 enabled
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; ring parameter and Vlan-Tag field added.
Release 6.3.1; ring parameter and Vlan-Tag field added.
output definitions
RingId
The numeric ID of the RRSTP ring.
Vlan-Tag
The VLAN to which the RRSTP ring frames are tagged.
Ring-Port-1
The first port in the RRSTP ring.
Ring-Port-2
The second port in the RRSTP ring.
Ring Status
The current state of the RRSTP ring (Enabled or Disabled).