Alcatel-Lucent 6850-48 参照ガイド

ページ / 3444
Distributed Spanning Tree Commands
page 15-172
OmniSwitch CLI Reference Guide
September 2009
show bridge rrstp ring
 Displays information for all the rings or for a specific ring that exists in the switch configuration.
show bridge rrstp ring [ring_id]
Syntax Definitions
ring_id
An existing ring ID number (1–128).
Defaults
By default displays information for all rings.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use the ring_id parameter with this command to display information for a specific ring.
Examples
-> show bridge rrstp ring
      RingId     Vlan-Tag     Ring-Port1     Ring-Port2     Ring Status
  -----------+------------+---------------+--------------+---------------
       2          1000          1/19           1/10         enabled
       6            20           1/1            1/8        disabled
     128             1           0/1           0/31         enabled
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; ring parameter and Vlan-Tag field added.
output definitions
RingId
The numeric ID of the RRSTP ring.
Vlan-Tag
The VLAN to which the RRSTP ring frames are tagged.
Ring-Port-1
The first port in the RRSTP ring.
Ring-Port-2
The second port in the RRSTP ring.
Ring Status
The current state of the RRSTP ring (Enabled or Disabled).