Alcatel-Lucent 6850-48 Guida Di Riferimento

Ethernet Port Commands

page 19-4

OmniSwitch CLI Reference Guide

Enables trap link messages. If enabled, a message is displayed on the Network Management Station 
(NMS) whenever the port changes state.

trap slot[/port[-port2]] port link {enable | disable | on | off}

Slot number you want to configure.

Port number of the interface you want to configure.

Last port number in a range of ports you want to configure.

Port link up/down traps are displayed on the NMS.

Port link up/down traps are not displayed on the NMS.

Same as enable.

Same as disable.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

N/A

-> trap 3/1 port link enable

-> trap 3 port link enable

-> trap 3/1-6 port link enable

Release 6.1; command was introduced.