Alcatel-Lucent 6850-48 Guida Di Riferimento

Ethernet Port Commands

page 19-6

OmniSwitch CLI Reference Guide

Configures interface line speed.

interfaces slot[/port[-port2]] speed {auto | 10 | 100 | 1000 | 10000 | max {100 | 1000}}

Slot number you want to configure.

Port number of the interface you want to configure.

Last port number in a range of ports you want to configure.

The switch will automatically set the line speed to match the attached 
device (auto-sensing).

Sets the interface to 10 Mbps.

Sets the interface to 100 Mbps.

Sets the interface to 1 Gigabit.

Sets the interface to 10 Gigabit.

Sets the maximum speed to 100 megabits.

Sets the maximum speed to 1000 megabits (1 Gigabit).

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• You can only configure one slot at a time. Repeat the command to configure additional slots.

• The auto option sets the speed to auto-sensing.

• Ten Gigabit fiber ports only support 10000 Mbps.

• Configuration changes made with the interfaces speed command on combo ports configured as either 

forced fiber or preferred fiber will only be made on the SFP fiber ports and not to the copper RJ-45 10/
100/1000 ports. See the 

 command for more information.

• Configuration changes made with the interfaces speed command on combo ports configured as either 

forced copper or preferred copper will only be made on the copper RJ-45 10/100/1000 ports and not to 
the SFP fiber port. See the 

Auto