Netgear gsm7312 Manuale Utente

Routing Commands

8-13

This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The 
value of <type> is either none or simple. 

The value for authentication key [key] must be 16 bytes or less. The [key] is composed of standard 
displayable, non-control keystrokes from a Standard 101/102-key keyboard.   

The default authentication type is none. 

The default password key is an empty string. Unauthenticated interfaces do not 

need an authentication key.

This command specifies the metric value that is to be used for the default route entry (0.0.0.0 with 
subnet mask = 0.0.0.0) in RIP updates originating from this interface.Valid values for <metric> 
range from 0 to 15. 

Note that a metric value of 0 suppresses default route originations (although a default route may be 
propagated on this interface from another router). A metric value of 1 instructs the router to always 
advertise a default route entry with a metric of 1 in its route update messages, which could 
adversely affect network operation.

0

This command enables or disables RIP on a router interface. The value for <mode> is either enable 
or disable. 

disable

This command configures the interface to allow RIP control packets of the specified version(s) to 
be received.