Netgear gsm7312 Manuale Utente

Switching Commands

7-27

The logical slot and the logical port.

The name of this lag. You may enter any string of up to 15 alphanumeric 
characters. 

Indicates whether the Link is up or down. 

May be enabled or disabled by selecting the corresponding line on the pull-
down entry field. The factory default is enabled. 

This object determines whether or not to send a trap when link status changes. 
The factory default is enabled. 

The Spanning Tree Protocol Administrative Mode associated with the port or 
lag. The possible values are: 
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port. 

A listing of the ports that are members of this lag, in slot.port notation. There 
can be a maximum of 8 ports assigned to a given lag. 

This command configures a new LAG and generates a logical slot and port number for it. Display 
this number using the “show lag” on page 26.

Before including a port in a LAG, set the port physical mode. See “config port 

This command adds one port to the LAG. The first interface is a logical slot and port number of a 
configured LAG. 

Before adding a port to a LAG, set the physical mode of the port. See “config port 

This command deletes one or more ports from the LAG. The first interface is a logical slot and port 
number of a configured LAG, and the second interface is a valid slot and port number that is a 
member of any LAG or all (to delete all ports in the specified LAG).