Adtran 3458-poe Manuale Hardware
NetVanta 3000 Series Hardware Installation Guide
Unit Installation
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
83
Figure 44. Wall Mounting the NetVanta PoE Power Supply
Supplying Power to the Unit
As shipped, each NetVanta 3000 Series is set to factory default conditions. After installing the base unit
and any option modules, the NetVanta 3000 Series is ready to be powered up. To power the unit, ensure
that the unit is properly connected to an appropriate power source (as outlined in the sections that follow).
and any option modules, the NetVanta 3000 Series is ready to be powered up. To power the unit, ensure
that the unit is properly connected to an appropriate power source (as outlined in the sections that follow).
Powering the NetVanta 3120 and NetVanta 3130
The NetVanta 3120 and NetVanta 3130 come equipped with a 12 VDC power supply for connecting to the
proper power receptacles.
proper power receptacles.
Powering the NetVanta 3200
The AC-powered NetVanta 3200 comes equipped with a 12 VDC power supply for connecting to the
proper power receptacles.
proper power receptacles.
When inserting the 12 VDC power supply connector into the POWER receptacle on the
back of the chassis, make sure to push the connector into the receptacle until you hear a
soft click. This ensures that the connector will not become disengaged during use.
back of the chassis, make sure to push the connector into the receptacle until you hear a
soft click. This ensures that the connector will not become disengaged during use.
When inserting the 12 VDC power supply connector into the POWER receptacle on the
back of the chassis, make sure to push the connector into the receptacle until you hear a
soft click. This ensures that the connector will not become disengaged during use.
back of the chassis, make sure to push the connector into the receptacle until you hear a
soft click. This ensures that the connector will not become disengaged during use.