Netopia 2e-h Guida Utente
Cayman 2E-H User’s Guide
Using the Command Line Interface
November 2000
4-33
set pinhole internal-port internal-port
Specifies the port number your Cayman 2E-H should use when
forwarding traffic of the specified type. Under most circumstances,
you would use the same number for the external and internal port.
forwarding traffic of the specified type. Under most circumstances,
you would use the same number for the external and internal port.
PPPoE Settings
You can use the following commands to configure basic settings,
port authentication settings, and peer authentication settings for PPP
over Ethernet on your Cayman 2E-H.
port authentication settings, and peer authentication settings for PPP
over Ethernet on your Cayman 2E-H.
set pppoe { on | off }
Enables or disables PPP over Ethernet on your Cayman 2E-H. You
must enable PPPoE before you can enter other PPP settings.
must enable PPPoE before you can enter other PPP settings.
Basic PPP Settings
set PPP module option { on | off }
Enables or disables PPP on the Cayman 2E-H. By default, PPP is
turned off.
turned off.
set PPP module mru integer
Specifies the Maximum Receive Unit setting for the PPP interface.
The
The
integer
argument can be any number between 128 and 2048.
By default, the MRU value for PPP over Ethernet is 1492.
set PPP module magic-number { on | off }
Enables or disables LCP magic number negotiation. By default, magic
number negotiation is turned on.
number negotiation is turned on.
set PPP module protocol-compression { on | off }
Specifies whether you want the Cayman 2E-H to compress the PPP
Protocol field when it transmits datagrams over the PPP link. By
default, protocol field compression is turned off.
Protocol field when it transmits datagrams over the PPP link. By
default, protocol field compression is turned off.