Netopia 4741 2a4na Guida Utente
WAN and System Configuration 8-21
System Configuration Screens
You can connect to the Netopia 4741’s system configuration screens in either of two ways:
■
By using Telnet with the device’s Ethernet por t IP address
■
Through the console por t, using a local terminal (see
)
You can also retrieve the Netopia 4741’s configuration information and remotely set its parameters using the
Simple Network Management Protocol (see
Simple Network Management Protocol (see
).
Open a Telnet connection to the device’s IP address; for example, “192.168.1.1.”
The console screen will open to the Main Menu, similar to the screen shown below:
Navigating through the System Configuration screens
To help you find your way to par ticular screens, some sections in this guide begin with a graphical path guide
similar to the following example:
similar to the following example:
This par ticular path guide shows how to get to the IP Setup screens. The path guide represents these steps:
■
Beginning in the Main Menu, select System Configuration and press Return. The System Configuration
Netopia 4741 v5.1.1
Easy Setup...
WAN Configuration...
System Configuration...
Voice Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
You always start from this main screen.
Main
Menu
IP Setup
System
Configuration