Руководство Пользователя для Netopia 4741 2a4na

You can connect to the Netopia 4741’s system configuration screens in either of two ways:

■

By using Telnet with the device’s Ethernet por t IP address

■

Through the console por t, using a local terminal (see 

)

You can also retrieve the Netopia 4741’s configuration information and remotely set its parameters using the 
Simple Network Management Protocol (see 

).

Open a Telnet connection to the device’s IP address; for example, “192.168.1.1.” 

The console screen will open to the Main Menu, similar to the screen shown below: 

To help you find your way to par ticular screens, some sections in this guide begin with a graphical path guide 
similar to the following example:

This par ticular path guide shows how to get to the IP Setup screens. The path guide represents these steps:

■

Beginning in the Main Menu, select System Configuration and press Return. The System Configuration 

                           Netopia 4741 v5.1.1 

                     Easy Setup...

                     WAN Configuration...

                     System Configuration...

                     Voice Configuration...

                     Utilities & Diagnostics...

                     Statistics & Logs...

                     Quick Menus...

                     Quick View...

Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.

Main

Menu

IP Setup

System

Configuration