Netopia r6100 Guida Di Riferimento

Go to the System Configuration screen. Select IP Address Serving and press Return. The IP Address Ser ving 
screen will appear.

Follow these steps to configure IP Address Ser ving:

■

If you enabled IP Address Ser ving, then DHCP, BootP clients, Dynamic WAN clients, and MacIP/KIP clients 
(if you have the AppleTalk kit installed) are automatically enabled.

■

Select Number of Client IP Addresses and enter the total number of contiguous IP addresses that the 
Netopia R6000 Series will distribute to the client machines on your local area network. Twelve-user models 
are limited to twelve IP addresses.

In the screen example shown above, five Client IP addresses have been allocated.

■

Select 1st Client Address and enter the first client IP address that you will allocate to your first client 
machine. For instance, on your local area network you may want to first figure out which machines are going 
to be allocated specific static IP addresses so that you can determine the pool of IP addresses that you will 
be ser ving addresses from via DHCP, BootP, Dynamic WAN, and/or MacIP.

Example: Your ISP has given your Netopia R6000 Series the IP address 192.168.6.137, with a subnet 
mask of 255.255.255.248. The subnet mask allocated will give you six IP addresses to use when 
connecting to the ISP over the Internet (for more information on IP addressing refer to 

). Your address range will be from .137-.143. In this example you would 

enter 192.168.6.138 as the 1st Client Address, since the router itself must have an IP address.

■

To enable DHCP, select Serve DHCP Clients and toggle it to Yes. DHCP ser ving is automatic when IP 
Address Ser ving is enabled.

■

The default DHCP Lease time is one hour. This may be unnecessarily brief in your network environment. 
Consequently, the DHCP lease time is now configurable. The DHCP Lease Time (Hours) setting allows you 
to modify the router’s default lease time of one hour. You can enter any number up to and including 168 
hours (one week) for the DHCP lease.

                              IP Address Serving

         IP Address Serving Mode...         DHCP Server

         Number of Client IP Addresses:     5
         1st Client Address:                192.168.1.100
         Client Default Gateway...          192.168.1.1

         Serve DHCP Clients:                Yes
         DHCP Lease Time (Hours):           1
         DHCP NetBIOS Options...

         Serve BOOTP Clients:               Yes

         Serve Dynamic WAN Clients          Yes

Configure Address Serving (DHCP, BOOTP, etc.) here.