Netopia r6100 Guida Di Riferimento

If Must Match a Defined Profile is set to No, then an IPX Enabled item is visible. Toggling this item to Yes 
or No (the default) controls whether or not IPX will be suppor ted on the ADSL link. If IPX Enabled is set to 
Yes, an IPX Parameters item becomes visible. If you select IPX Parameters, the IPX Parameters screen 
appears (see 

). This screen allows you to configure 

various IPX parameters for ADSL connections established without an explicitly configured connection 
profile.

If you are using RFC1483 datalink encapsulation, the IP Parameters (Default Profile) screen allows you to 
configure various IP parameters for ADSL connections established without an explicitly configured connection 
profile:

For an ADSL link, Network Address Translation (NAT) is disabled by default in the Default Profile. You can enable 
it by toggling Address Translation Enabled to Yes. For details on setting up IP Parameters see 

.

                        IP Parameters (Default Profile)

         Address Translation Enabled:       No

         Filter Set (Firewall)...
         Remove Filter Set

         Receive RIP:                       Both
         Transmit RIP:                      Off

Return/Enter accepts * Tab toggles * ESC cancels.