Quantum atl 7100 Guida Utente
Chapter 2 Operating the Library
Operating Procedures
Operating Procedures
20
Quantum|ATL 7100 Series Library Operator’s Guide
large number of cartridges. In this situation, you can load or
unload the cartridges through the storage array door.
unload the cartridges through the storage array door.
To bulk load or unload cartridges through the storage array door:
1
If loading cartridges, verify all cartridges have a bar code label.
2
If the library is powered on, press the control panel
STANDBY
button. The library robotics will stop after completing the
current command(s). Verify that System Off-line is displayed
in the SDA.
current command(s). Verify that System Off-line is displayed
in the SDA.
3
Open the storage array door.
4
Unload and/or load tape cartridges in the bins. When loading
a cartridge, insert the cartridge in the proper orientation (see
a cartridge, insert the cartridge in the proper orientation (see
, bar code label facing out and on the left side).
Caution:
DO NOT USE CompacTape I
, CompacTape II
or
CompacTape IIIXT
tape cartridges in this library.
Note:
Use the bar code labels provided with the library.