Quantum DLT-V4 Guida Utente
Chapter 3 Installing the Internal SATA Tape Drive
Installing the Internal SATA Tape Drive
DLT-V4 Product Manual
18
Installing the Internal SATA Tape Drive
3
To install the tape drive, follow these steps:
1
Shut down the operating system and power off the server or
workstation.
2
Power off all peripheral devices, such as printers and other connected
devices.
3
Remove the cover from the server or workstation as described in the
server or workstation’s documentation (see
Figure 8 Removing the
Workstation Cover (example)
Workstation Cover (example)
Caution:
Do not go to step 3 until you have completed steps 1
and 2. Failure to follow these instructions may result
in damage to the tape drive or other devices.