Quantum DLT-V4 Guida Utente
Chapter 5 Installing the Tabletop SCSI Tape Drive
Completing the Tabletop SCSI Tape Drive Installation
DLT-V4 Product Manual
42
Completing the Tabletop SCSI Tape Drive Installation
5
1
Secure the SCSI cable connectors by tightening the screws until snug.
2
Ensure that the power switch on the rear panel of the tape drive is in
the OFF position. Connect the power cable to the tape drive and plug
the power cable in to the nearest power outlet (see
3
Connect the power cables to the host server or workstation and all
peripheral devices.
4
Power on the tape drive and any attached peripheral devices.
5
Power on the server or workstation and allow its operating system to
start.
Confirming the Installation
5
When you turn on power to the tape drive, it performs its power-on self-
test. The LEDs on the front panel of the tape drive illuminate in a specific
sequence (see
for details).
Note:
If the SCSI cable does not fit the connector on the SCSI
host adapter, you either have an incompatible SCSI host
adapter or you need to purchase a cable adapter. Contact
the sales representative or the SCSI host adapter
manufacturer for information.