Quantum DLT-V4 Guida Utente
Chapter 6 Installing the Tabletop USB/eSATA Tape Drive
Installing the Tabletop USB/eSATA Tape Drive
DLT-V4 Product Manual
46
Be sure to follow these additional guidelines when selecting a location for
the tape drive:
• Allow at least 6 inches (15.2 cm) behind the tape drive for proper
• Allow at least 6 inches (15.2 cm) behind the tape drive for proper
cooling.
• Avoid locations near printers or photocopy machines, both of which
produce paper fiber and other types of dust and airborne
contaminants.
• Do not place the tape drive on the floor.
• Avoid locations near generators, electric motors, audio speakers, or
• Avoid locations near generators, electric motors, audio speakers, or
other sources of magnetic fields. Magnetic fields can adversely affect
the tape drive and data cartridges.
Installing the Tabletop USB/eSATA Tape Drive
6
1
Shut down and power off the host and all peripheral devices attached
to the host.
2
Connect the USB or eSATA cable to the tape drive and to the USB or
eSATA port on your PC (see
3
Ensure that the power switch on the rear panel of the tape drive is in
the OFF position. Connect the power cable to the tape drive and plug
the power cable in to the nearest power outlet (see