Quantum DLT-V4 Guida Utente
Chapter 9 Using Data and Cleaning Cartridges
Write-Protecting the Data Cartridge
DLT-V4 Product Manual
61
Write-Protecting the Data Cartridge
9
All data cartridges have a write-protect switch to prevent accidental
erasure of data. Before loading a data cartridge into your tape drive,
make sure to position the write-protect switch on the front of the data
cartridge as desired, as shown in
.
The indicator on the top of the data cartridge also points to the
appropriate icon, indicating the write-protected status. In addition,
DLTtape IV cartridges are automatically write protected. DLTtape VS1
cartridges that have been pre-written in a DLT VS160 are automatically
write protected.
•
•
To Write Protect the Cartridge —
Slide the switch to the right to write-
protect the data cartridge. A “locked” icon appears on the switch
indicating that the data cartridge is write-protected. You cannot erase
from or append data to the media.
•
To Write Enable the Cartridge—
Slide the switch to the left to allow
your tape drive to write data to the data cartridge. The “unlocked”
icon appears on the switch. You can now erase or add data to the
media.
Figure 26 DLTtape VS1 Data
Cartridge Write-Protect Switch
Cartridge Write-Protect Switch
Write-protect
switch
switch
Write protected
Write enabled
Indicator