Quantum DLT-V4 Guida Utente
DLTtape and Super DLTtape External Cartridge Inspection
Cartridge
Inspect the exterior of the
cartridge for chips, cracks,
dents or missing screws.
Gently shake the cartridge,
listening for rattles
or loose pieces.
Inspect the exterior of the
cartridge for chips, cracks,
dents or missing screws.
Gently shake the cartridge,
listening for rattles
or loose pieces.
Cartridge Hub
Confirm that the spring-loaded
hub on the bottom of the
cartridge is centered. Press
the hub. It should spring back
if operating properly. Operation
of the reel locks may release
the hub and re-center.
Confirm that the spring-loaded
hub on the bottom of the
cartridge is centered. Press
the hub. It should spring back
if operating properly. Operation
of the reel locks may release
the hub and re-center.
Write Protection Switch
Move the switch. It should be
able to snap into write-protected
mode and write-enabled mode.
Move the switch. It should be
able to snap into write-protected
mode and write-enabled mode.
Reel Locks
Check that both reel locks are
visible. Verify operation using
a small flat blade screwdriver.
The reel locks should spring
back when released.
Check that both reel locks are
visible. Verify operation using
a small flat blade screwdriver.
The reel locks should spring
back when released.
Visual Inspection
Visual
Inspection
3.1
Cartridge Door
Ensure the door is
movable and that
the spring is present.
Ensure the door is
movable and that
the spring is present.
www.quantum.com
Visual Inspection
3.1
Media Care Guide