Quantum DLT-V4 Guida Utente
Ultrium LTO External Cartridge Inspection
Cartridge
Inspect the exterior of the
cartridge for chips, cracks,
dents or missing screws.
Gently shake the cartridge,
listening for rattles or
loose pieces.
Inspect the exterior of the
cartridge for chips, cracks,
dents or missing screws.
Gently shake the cartridge,
listening for rattles or
loose pieces.
Cartridge Hub/Reel Locks
Confirm that the spring-
loaded hub on the bottom of
the cartridge is centered.
Press the hub. It should spring
back if operating properly.
Operation of the reel
locks may release the hub
and re-center. Check that the
reel locks are visible and out.
The Hub should not turn.
Confirm that the spring-
loaded hub on the bottom of
the cartridge is centered.
Press the hub. It should spring
back if operating properly.
Operation of the reel
locks may release the hub
and re-center. Check that the
reel locks are visible and out.
The Hub should not turn.
Write Protection Switch
Move the switch. It should be
able to snap into write-protected
mode and write-enabled mode.
Move the switch. It should be
able to snap into write-protected
mode and write-enabled mode.
Visual Inspection
Visual
Inspection
3.2
www.quantum.com
Visual Inspection
3.2
Cartridge Door
Ensure the door is moveable
and springs closed.
Ensure the door is moveable
and springs closed.
Media Care Guide