Sony STR-DA5600ES Guida Utente

You can switch the usage of the speaker(s) 
connected to the SURROUND BACK/
ZONE 2 terminals in accordance with the 
intended use. Be sure to set “Sur Back Assign” 
before you perform auto calibration.

The menu is displayed on the TV screen.

V/v repeatedly to select 

b.

The Settings menu list appears on the TV 
screen.

V/v repeatedly to select 

b.

V/v repeatedly to select 

V/v repeatedly to select 

Press RETURN/EXIT O.

This setting is available if the speaker pattern is set 
so that there are no surround back speakers and no 
front high speakers.

You can select the front speakers you want to 
drive.

You can confirm which set of terminals (A or 
B) are selected by checking the indicators in 
the display window.

• If the speaker pattern is set so that there are front 

high speakers, you cannot select the FRONT B/
FRONT HIGH terminals.

• This setting is not available when headphones are 

connected.

OFF

The SURROUND BACK/
ZONE 2 terminals can be 
used for a surround back 
speakers connection.

BI-AMP

The SURROUND BACK/
ZONE 2 terminals can also 
be used for a bi-amplifier 
connection (page 112).

ZONE2

The SURROUND BACK/
ZONE 2 terminals can also 
be used for a zone 2 
connection (page 94).

The speakers connected to the 
FRONT A terminals.

The speakers connected to the 
FRONT B/FRONT HIGH 
terminals.

The speakers connected to both the 
FRONT A and FRONT B/FRONT 
HIGH terminals (parallel 
connection).

“SPEAKERS OFF” appears in the 
display window.
No audio signals are output from any 
speaker terminals, or the PRE OUT 
jacks.

SPEAKERS (A/B/A+B/OFF)