Roland RD-700GX Guida Utente
142
Connecting to Your Computer
The USB driver to be used when a computer is connected to
the USB connector is determined as follows:
the USB connector is determined as follows:
1.
Press the [EDIT] button.
2.
Press the Cursor [
] [
] buttons to select “0.
SYSTEM,” and then press the [ENTER] button.
3.
Press the Cursor [
] [
] buttons to switch
screens, and press the Cursor [
] [
] buttons
to move the cursor to “USB Driver.”
4.
Use the [DEC] [INC] buttons or the VALUE dial to
select the USB driver you want to use.
select the USB driver you want to use.
5.
Press the [F1 (WRITE)] button.
6.
Turn the power off, then on again.
In some cases, when USB memory is connected to the USB
MEMORY connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the USB
memory setting.
MEMORY connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the USB
memory setting.
1.
Press the [EDIT] button.
2.
Press the Cursor [
] [
] buttons to select “0.
SYSTEM,” and then press the [ENTER] button.
3.
Press the Cursor [
] [
] buttons to switch
screens, and press the Cursor [
] [
] buttons
to move the cursor to “USB Memory Mode.”
4.
Use the [DEC] [INC] buttons or the VALUE dial to
edit the value.
edit the value.
5.
Press the [F1 (WRITE)] button.
6.
Turn the power off, then on again.
If the RD-700GX is connected to your computer, performance
data from a MIDI device connected to the RD-700GX’s MIDI
IN connector can be sent to your computer.
data from a MIDI device connected to the RD-700GX’s MIDI
IN connector can be sent to your computer.
Switching USB Drivers
Parameter
Value
Description
USB Driver
ORIGINAL
Select this if you’re using the
USB driver on the included CD-
ROM (Audio Key Utility 2), or
a USB driver you downloaded
from the Roland website.
USB driver on the included CD-
ROM (Audio Key Utility 2), or
a USB driver you downloaded
from the Roland website.
GENERIC
Choose this if you want to use
the standard USB driver that
was included with your
computer.
the standard USB driver that
was included with your
computer.
Changing the USB Memory Setting
Parameter
Value
USB Memory
Mode
Mode
Mode1, Mode2
Using the RD-700GX as a USB MIDI
Interface (USB MIDI Thru Sw)
Interface (USB MIDI Thru Sw)
Parameter
Value
Description
USB MIDI
Thru Sw
Thru Sw
OFF
Performance data from the
device connected to the RD-
700GX’s MIDI IN connector
will not be sent to your
computer.
device connected to the RD-
700GX’s MIDI IN connector
will not be sent to your
computer.
ON
Performance data from the
device connected to the RD-
700GX’s MIDI IN connector
will be sent to your computer.
device connected to the RD-
700GX’s MIDI IN connector
will be sent to your computer.
RD-700GX_e.book 142 ページ ２００８年２月１３日 水曜日 午後５時４９分