Rollei Dk4010 Guida Utente
GB-175
Messages and Responses
Message
Cause
Response
MEMORY CARD FULL
There is not enough recording
space available on the memory
card.
space available on the memory
card.
Insert a new memory card or
erase some unwanted images.
erase some unwanted images.
NO CARD
There is no memory card inserted.
Insert a memory card.
WRITE PROTECT
The SD memory card is write-
protected.
protected.
CARD ERROR or
UNSUPPORTED
FORMAT
UNSUPPORTED
FORMAT
You are using a card that was
formatted on another device.
formatted on another device.
Format the memory card in the
camera. (Æ p.152)
camera. (Æ p.152)
The format of the memory card is
not compatible with this camera.
not compatible with this camera.
Insert a new memory card or
format this memory card.
format this memory card.
The card is not inserted correctly.
Re-insert the memory card.
NO IMAGE
Nothing is recorded on the memory
card.
card.
Insert a memory card that has
been used to take pictures, or
shoot images.
been used to take pictures, or
shoot images.
F
F CLOSE
The flash has not been popped up.
Pop the flash up.
ZOOMING ERROR
The camera was turned on with the
lens cap still attached.
lens cap still attached.
Remove the lens cap and turn the
camera on, taking care not to
touch the lens as you do so.
camera on, taking care not to
touch the lens as you do so.
Camera malfunction or fault.
Turn the camera on and off
several times. If this does not
correct the problem, contact a
Rollei Service Center and request
repairs.
several times. If this does not
correct the problem, contact a
Rollei Service Center and request
repairs.
CANNOT SHOOT
You are using bracketing and there
is not enough available space on
the memory card.
is not enough available space on
the memory card.
Insert a new memory card or
erase some unwanted images.
erase some unwanted images.
PRINTER ERROR
The printer is not ready to print.
Check that the printer is ready to
print. Refer to the instructions
provided with the printer for
details.
print. Refer to the instructions
provided with the printer for
details.
An error was detected in the
connection to the printer.
connection to the printer.
Reconnect to the printer and then
try again.
try again.