Enterasys csx150 Guida Utente
C
ONFIGURING
B
ASIC
IP R
OUTING
O
VERVIEW
This chapter provides information for configuring basic IP routing features. Basic IP routing
configuration includes:
configuration includes:
When you enable this option, the system operates as an IP Router. If you also enable bridging,
it will route IP packets and bridge all other packet types.
it will route IP packets and bridge all other packet types.
The operating mode may be either host or router. The router operating mode is the default. The
IP host mode allows you to use IP applications, such as Telnet and SNMP, without enabling IP
routing.
IP host mode allows you to use IP applications, such as Telnet and SNMP, without enabling IP
routing.
Network Interfaces define the IP networks to which the CyberSWITCH provides access. If IP
RIP is enabled, this also includes IP RIP interface information.
RIP is enabled, this also includes IP RIP interface information.
Other routers on the network that support IP RIP will not need static routes; IP RIP will
maintain those routes. However, static routes must be configured to identify remote networks
connected across the WAN, and for routers that do not support IP RIP.
maintain those routes. However, static routes must be configured to identify remote networks
connected across the WAN, and for routers that do not support IP RIP.
•
IP RIP automates the maintenance of routing tables on IP devices.
, provides information for configuring
advanced IP routing features. Advanced IP routing features include:
•
•
configuring static ARP table entries
•
enabling/disabling the isolated mode
•
enabling/disabling static route lookup via RADIUS
•
configuring the IP address pool
•
configuring IP filters
•
configuring DHCP
I
NTERNET
P
ROTOCOL
(IP) O
PTION
E
NABLING
IP
U
SING
CFGEDIT
1.
Internet Protocol (IP) routing is disabled as a default. To begin the IP routing configuration, you
must first enable IP routing. Select IP Routing from the Options menu.
must first enable IP routing. Select IP Routing from the Options menu.
2.
Follow the onscreen instructions for enabling IP routing. Once IP has been enabled, the full IP
Configuration menu will be displayed as shown below:
Configuration menu will be displayed as shown below: