Marantz AV8003 Guida Utente
CONNECTIONS
NAMES AND
FUNCTION
SETUP
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
REMOTE
CONTROLLER
TROUBLESHOOTING
OTHERS
ENGLISH
5
t PURE DIRECT button and indicator
When this button is pressed once, “SOURCE
DIRECT” appears on the FL display. If pressed again,
“PURE DIRECT” appears. After 2 seconds, the FL
display indication goes out.
In the source/pure direct mode, the tone control
circuitry and bass management are bypassed.
DIRECT” appears on the FL display. If pressed again,
“PURE DIRECT” appears. After 2 seconds, the FL
display indication goes out.
In the source/pure direct mode, the tone control
circuitry and bass management are bypassed.
Notes:
• The surround mode is automatically switched to
AUTO when the pure direct function is turned on.
• Additionally, speaker configurations are fixed
automatically as follows.
Front SPKR = LARGE
Center SPKR = LARGE
Surround SPKR = LARGE
Surround Back SPKR = LARGE
Sub woofer = YES
y ZONE
button
Press this button to activate the Zone system.
“MULTI” indicator will be illuminated in the display.
(See page 51)
“MULTI” indicator will be illuminated in the display.
(See page 51)
u ZONE SPEAKER button
Press this button to activate the Zone Speaker
system. “MULTI” indicator will be illuminated in the
display. (See page 52)
system. “MULTI” indicator will be illuminated in the
display. (See page 52)
q POWER switch and STANDBY
indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the POWER switch is in the
ON position, the power of this unit can be turned
ON/OFF by pressing the POWER button on the
remote controller.
When this unit is in the standby mode with the
POWER switch set to the ON position, pressing the
ENTER button also allows to turn the power on.
again to turn it OFF. If the POWER switch is in the
ON position, the power of this unit can be turned
ON/OFF by pressing the POWER button on the
remote controller.
When this unit is in the standby mode with the
POWER switch set to the ON position, pressing the
ENTER button also allows to turn the power on.
The STANDBY indicator lights up when this unit
is the standby mode (power OFF) by the remote
controller.
is the standby mode (power OFF) by the remote
controller.
w INPUT SELECTOR knob
(AUDIO/ VIDEO)
This knob is used to select the input sources. (See
page 38)
page 38)
e SURROUND MODE button
Press this button to select the surround mode.
r AUTO (Auto surround) button
Press this button to select the AUTO mode from the
surround modes. When this mode is selected, the
unit determines the surround mode corresponding to
a digital input signal automatically.
surround modes. When this mode is selected, the
unit determines the surround mode corresponding to
a digital input signal automatically.
i MENU
button
Press this button to enter the SETUP MAIN MENU.
o EXIT
button
Press this button to exit from the SETUP MAIN
MENU.
MENU.
!0 BAND
button
Press this button to switch between FM and AM in
the TUNER mode.
the TUNER mode.
!1 T-MODE
button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode.
(See page 48)
mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode.
(See page 48)
!2 INFRARED receiving sensor window
This window receives infrared signals for the remote
controller.
controller.
!3 MEMORY
button
Press this button to enter the tuner preset memory
numbers or station names. (See page 48)
numbers or station names. (See page 48)
!4 CLEAR
button
Press this button to cancel the station-memory
setting mode or preset scan tuning. (See page 49)
setting mode or preset scan tuning. (See page 49)
!5 VOLUME control knob
This knob is used to adjust the overall sound level.
Turning the control clockwise increases the sound
level.
Turning the control clockwise increases the sound
level.
!6 DISPLAY
button
Press this button to change the FL display mode.
!7 M-DAX
button
Press this button to select M-DAX processing for
input source. (See page 39)
input source. (See page 39)
!8 TOP button
Press this button to return to the top screen of the
main menu when configuring setup items. (See
page 20)
Also, press this button to return to the top screen of
the network when using the network.
main menu when configuring setup items. (See
page 20)
Also, press this button to return to the top screen of
the network when using the network.
!9 Cursor (
5, ∞, 2, 3) / ENTER button
Press these buttons to operate the SETUP MAIN
MENU, NETWORK and TUNER function.
MENU, NETWORK and TUNER function.
@0 7.1CH INPUT button
Press this button to select the output of an external
multichannel player.
multichannel player.
@1 MIC
jack
Automatically measure speaker characteristics using
the included microphone. (See page 26)
the included microphone. (See page 26)
@2 THX
button
Press this button to select THX processing for input
source.
source.
@3 HEADPHONE jack for stereo headphones
This jack may be used to listen to the unit’s output
through a pair of headphones. Be certain that the
headphones have a standard 1/4” stereo phono
plug.
through a pair of headphones. Be certain that the
headphones have a standard 1/4” stereo phono
plug.
NAMES AND FUNCTION
TOP
TOP
ZONE
ZONE
SPEAKER
SPEAKER
DISPLAY
DISPLAY
INPUT
INPUT
7.1CH
7.1CH
DIRECT
DIRECT
PURE
PURE
PHONES
PHONES
THX
THX
M-DAX
M-DAX
MODE
MODE
SURROUND
SURROUND
CLEAR
CLEAR
MEMORY
MEMORY
T-MODE
T-MODE
BAND
BAND
EXIT
EXIT
MENU
MENU
ZONE
ZONE
ENTER
ENTER
DOWN
DOWN
VOLUME
VOLUME
UP
UP
INPUT
INPUT
SELECTOR
SELECTOR
AUTO
AUTO
SETUP MIC
SETUP MIC
HDMI
HDMI
M-DAX
M-DAX
PURE DIRECT
PURE DIRECT
POWER ON/OFF
POWER ON/OFF
STANDBY
STANDBY
AV PRE TUNER AV8003
AV PRE TUNER AV8003
q
t y u i o !0 !1
!3!4
r
!2
!5
e
w
!6
!7
!8
@0
@1
@3
!9
@2
FRONT PANEL
AV8003N.indb 5
AV8003N.indb 5
08.4.28 10:49:10 AM
08.4.28 10:49:10 AM