Axis 207MW Manuale Utente

An event in the AXIS 207W/AXIS 207MW is when a trigger is activated, causing a certain 

action to be performed. The event is the set of parameters (or conditions) that specifies how 

and when which actions will be performed. A common event is when the camera uploads 

images, triggered by an alarm.

This section describes how to configure the camera to perform certain actions when an 

event (e.g. an alarm) occurs.

This describes the 

state that the input must be in for 

an event to be triggered e.g. a 

door sensor connected to the 

camera’s input port. If the door 

sensor is active, an event is 

triggered.

Movement in a 

motion detection window can be 

used to trigger an event. Select the motion detection window from the drop-down list and 

specify whether to trigger the event when motion stops or starts. For information on how 

to set up motion detection windows see Motion Detection, on page 24.

This is used to trigger the event for changes in the the sound level, as 

configured in Setup > Audio.

This option makes use of the action buttons on the live view page, which 

are used to start or stop the event manually, e.g. activate an alarm connected to the 

camera’s output port. Alternatively the event can be triggered via the product's API 

(Application Programming Interface).

To upload images when the event type is triggered, check this box to 

display a dropdown list with the available upload options. Selecting the upload type (FTP, 

HTTP or Email) displays further settings for your selection. Please see the online help for 

descriptions of these settings.

Mail servers must be configured under 

The output port controls external equipment connected to the I/O port 

on the AXIS 207W/AXIS 207MW, e.g. an alarm bell or light.