Axis 207MW Manuale Utente

This method sends notification messages to an HTTP notification 

server that listens for these. Click the HTTP server settings... button to set up the 

destination server.

This method sends notification messages to an HTTP notification 

server that listens for these. Click the TCP server settings... button to set up the destination 

server.

Please see the online help for more information.

The motion detection feature is used to generate an alarm whenever movement occurs (or 

stops) in the video image. A total of 10 Include and/or Exclude windows can be 

configured.

• Included windows target specific areas within the whole video image
• Excluded windows define areas within an Include window that should be ignored 

(areas outside Include windows are automatically ignored)

Once configured, the motion detection windows will appear in the list of available triggers, 

for triggering events. See the section on Event Configuration above.

Using the motion detection feature may decrease the camera’s overall performance.

1. Click Motion Detection in the Event Configuration menu.
2. Click the Configure Included Window radio button.
3. Click New, or if using the Java Applet, click Add Window.
4. Enter a descriptive name under Window name.
5. Adjust the size (drag the bottom right-hand corner) and position (click on the text 

at the top and drag to the desired position).

6. Adjust the Object size, History and Sensitivity profile sliders (see table below for 

details). Any detected motion within an active window is then indicated by red 

peaks in the Activity window (the active window has a red frame).

7. Click Save.

To exclude parts of the Include window, click the 

Configure Excluded Windows button 

and position the Exclude window as required, within the Include window.