U-Line clrco2175b40 Guida Utente

5. Reconnect power to the unit and allow it to run for one 

hour (minimum) until any remaining ice has been 
ejected from the ice maker assembly.

6. Disconnect power to the unit, dry any remaining water 

from the ice maker assembly, and reconnect any lines 
removed from the water supply valve.

7. Disconnect the power cord from its outlet and leave it 

disconnected until the unit is returned to service.

8. Clean and dry the interior of the cabinet.

9. During period of non-use, the cabinet must remain 

open to prevent the formation of mold and mildew. 
Open door a minimum of 2” (5 cm) to provide the 
necessary ventilation.

If the unit is being removed from service for disposal, 
check and obey all Federal, State and/or local regulations 
regarding the disposal and recycling of refrigeration 
appliances, and follow these steps completely:

1. Disconnect power to the unit and unplug the power 

cord from its outlet.

2. Shut off water supply to the unit at the main water 

source and disconnect the supply line to the unit’s water 
valve.

3. Remove the cabinet door if equipped and secure all 

interior shelves to the interior of the cabinet using a 
heavy duty cloth or package sealing tape.

Proper maintenance of your U-Line unit will ensure 
efficiency, top performance and long life. The 
maintenance intervals listed are based on normal 
conditions. You may want to shorten the intervals if you 
have pets or other special considerations.

• Surfaces may be cleaned with a mild detergent and 

warm water solution. Do not use solvent-based or 
abrasive cleaners. Use a soft sponge and rinse with 
clean water. Wipe with a soft, clean towel to prevent 
water spotting.

• Stainless steel surfaces and components can discolor 

when exposed to chlorine gas, pool chemicals, salt 
water or cleaners with bleach.

• Keep your stainless steel unit looking new by cleaning 

with a good quality all-in-one stainless steel cleaner/
polish on a monthly basis. For best results use Claire

®

 

Stainless Steel Polish and Cleaner, which can be 
purchased from U-Line Corporation, part number 
713348.

• If any surface discoloring or rusting appears, clean it 

quickly with Bon-Ami

®

 or Barkeepers Friend Cleanser

®

 

and a non-abrasive cloth. Always clean in the direction 
of the grain. Always finish this process with Claire

®

 

Stainless Steel Polish and Cleaner or comparable 
product to prevent further problems.

• Rust that is not cleaned up promptly can penetrate into 

the surface of the stainless steel and complete removal 
of the rust may not be possible.

Automatic (Cycle) Defrost and Frost-Free Models
These models do not produce frost in normal operating 
conditions. However, a frost pattern may be noticed on 
the interior walls if the unit is repeatedly opened in a high 
heat or high humidity location. If this frost pattern does 
not clear within 24 hours, your unit will require manual 
defrosting.