EchoStar dsb-2110 2ci viaccess Manuale Utente

11

Press the MENU key to display the “Main Menu”   o
n the screen.

Select a sub-menu using the  ,   keys or  the numeric k
eys. Please note that the OK key is always  a confirma
tion of your selection.  To go back to the previous me
nu, press the  MENU key.

The initial code is set as [0000] but you can change it (See “Change PIN code” on page 13).

The Installation, “Enter PIN code” Menu is displayed only when the Installation  Lock is set as [ON].

If you are unable to get any signal quality, please check the LNB Setting to ensure you have selected the corr
ect LNB and switch settings.

This menu is to align your dish to the selected satellite.

After setting the parameters, press the OK key to store th
e parameter values. And Start Search(Press  OK) to searc
h the channels of transponder you want.

Refer to the Signal Quality bar and the Signal Lev
el bar at the bottom of the screen. It is recommend
ed that the signal is at the Medium level or higher.
If it is not , please adjust your satellite dish.

×        ASTRA2       Ø