EchoStar dsb-2110 2ci viaccess Manuale Utente

Note: To stop searching press the         key on the

Using the Auto Search option, the EchoStar DSB-211
0 2CI Viaccess searches for all available channels (Ra
dio and TV) on the currently selected satellite. The na
mes of the found TV channels are shown on the left a
nd the total number of found TV and Radio channels a
re mentioned on the right.

A Satellite Master Antenna Television (SMATV) system
which is intended for the distribution of  television and
sound signals to household in one or
6

 

more adjacent buildings.

A SMATV System represents a means for sharing
the same resources among several users for satellite and
terrestrial reception, and  it is designed to perform
the adaptation of the satellite TV signals to the SMATV
channel characteristics.

This receiver has a SMATV-IF facility to operate with SMATV.
This configuration allows the direct distribution of the QPSK signal received from the satellite
to the SMATV-IF distribution network in the extended IF band (above 950 MHz).

Before you start, you have to check your condition whether it is possible to use this facility or not in your
 households. (You can ask your household supervisor.)

If this receiver is connected to a SMATV network, select  “SMATV Configuration”.
The most common alternatives for “Symbol rate” and “FEC” are already preprogrammed.
(When you need to change the  “Symbol rate” for the exceptional frequency, select as you know.)
Move to “Start Auto Search” and just press the OK  key.
Then, the “Auto Search” procedure will start.

To cancel the processing while the  “Auto Search” is proceeding, press the MENU key.

12

×     27500   Ø

remote control or on the front panel. This
cancels the searches and the found
channels will be discarded. All other keys
of the remote are disable during searching