Zhone 7995 Guida Utente
6. Monitoring and Troubleshooting
6-8
September 2004
7990-A2-GB20-20
Entry Response Messages
, can appear in response
to commands or during data entry. They appear in the messages area at the
bottom of the ATI screen and are listed in alphabetical order.
bottom of the ATI screen and are listed in alphabetical order.
Table 6-4.
Entry Response Messages (1 of 2)
Device Message
What Message Indicates
What To Do
0.0.0.0 is an invalid
IP address
IP address
An IP address of all zeros
was entered.
was entered.
Enter a valid, non-zero
IP address.
IP address.
Access level is
Operator.
Configuration is
read-only.
Operator.
Configuration is
read-only.
The operator requested that
configuration options be
loaded, but does not have
authority to edit them.
configuration options be
loaded, but does not have
authority to edit them.
If configuration options are to be
edited, use a Login ID that has
Administrator authority.
edited, use a Login ID that has
Administrator authority.
Cannot Save – no
Login IDs with Access
Administrator
Login IDs with Access
Administrator
All of the login IDs being
saved have an access level
below Administrator.
saved have an access level
below Administrator.
Change the access level of
at least one Login ID to
Administrator so that
configuration changes can be
made. (Operator-level users
cannot make configuration
changes.) Save the Login IDs.
at least one Login ID to
Administrator so that
configuration changes can be
made. (Operator-level users
cannot make configuration
changes.) Save the Login IDs.
Command Complete
Action requested has
successfully completed.
successfully completed.
No action is needed.
Invalid Character
A nonprintable ASCII
character has been entered.
character has been entered.
Reenter the information using
valid characters.
valid characters.
Invalid – Data Terminal
Initiated Loopback
Active
Initiated Loopback
Active
Network-initiated loopback
was in progress when the
selection was made.
was in progress when the
selection was made.
No action is needed.
Invalid entry at cursor
Invalid IP address for this
function.
function.
, to
determine the permitted address
range for this field.
range for this field.
Invalid Password
Login is required and an
incorrect password or Login
ID was entered; access is
denied.
incorrect password or Login
ID was entered; access is
denied.
Enter the correct Login ID
and password combination.
and password combination.
Contact your system
administrator to verify your
Login ID and password.
administrator to verify your
Login ID and password.
Invalid – [Test] Already
Active
Active
The described test was
already in progress when the
selection was made.
already in progress when the
selection was made.
Allow the test to continue.
Select another test.
Stop the test.
Invalid Test
Combination
Combination
A loopback or pattern test
was in progress when Start
was selected to start the test,
or was active on the same
interface when the test was
selected.
was in progress when Start
was selected to start the test,
or was active on the same
interface when the test was
selected.
Wait until the other test ends.
Abort all tests from the Test
menu screen.
menu screen.
Stop the test from the same
screen from which the test
was started.
screen from which the test
was started.