ZyXEL 2WG Guida Utente
ZyWALL 2WG User’s Guide
213
C
H A P T E R
10
WLAN Screens
10.1 Overview
This chapter discusses how to configure wireless LAN on the ZyWALL.
A wireless LAN can be as simple as two computers with wireless LAN adapters
communicating in a peer-to-peer network or as complex as a number of computers with
wireless LAN adapters communicating through access points which bridge network traffic to
the wired LAN. To add a wireless network to the ZyWALL connect an Access Point (AP) to a
port in the WLAN role. To use the built-in wireless card to add a wireless network see
A wireless LAN can be as simple as two computers with wireless LAN adapters
communicating in a peer-to-peer network or as complex as a number of computers with
wireless LAN adapters communicating through access points which bridge network traffic to
the wired LAN. To add a wireless network to the ZyWALL connect an Access Point (AP) to a
port in the WLAN role. To use the built-in wireless card to add a wireless network see
The following diagram shows the wireless clients connecting to an AP connected to a
ZyWALL Ethernet port in the WLAN role.
ZyWALL Ethernet port in the WLAN role.
Figure 131 WLAN Overview
10.1.1 What You Can Do in the WLAN Screens
• Use the WLAN screen (
) to configure TCP/IP, DHCP, IP/MAC
binding and NetBIOS settings on the WLAN.
• Use the Static DHCP screen (
) to configure the IP addresses
assigned to devices in the LAN by DHCP.
• Use the IP Alias screen (
) to configure IP alias settings on the
ZyWALL’s LAN ports.