ZyXEL p-660h-61 Guida Utente

Prestige 660H Series User’s Guide 

Menu 1 General Setup 

         21-1 

Menu 1 — General Setup contains administrative and system-related information (shown next). The 
System Name field is for identification purposes. However, because some ISPs check this name you 
should enter your computer's  "Computer Name".  

♦ 

In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification 
tab, note the entry for the Computer name field and enter it as the Prestige System Name. 

♦ 

In Windows 2000 click Start, Settings, Control Panel and then double-click System. Click 
the Network Identification tab and then the Properties button. Note the entry for the 
Computer name field and enter it as the Prestige System Name. 

♦ 

In Windows XP, click start, My Computer, View system information and then click the 
Computer Name tab. Note the entry in the Full computer name field and enter it as the 
Prestige System Name. 

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this 
blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name 
(System Name) on each individual computer, the domain name can be assigned from the Prestige via 
DHCP. 

Enter 1 in the Main Menu to open Menu 1 — General Setup (shown next). 

Fill in the required fields. Refer to the table shown next for more information about these fields. 

 

                   Menu 1 - General Setup 
 
          System Name= ? 
          Location= 
          Contact Person's Name= 
          Domain Name= 
          Edit Dynamic DNS= No 
 
          Route IP= Yes 
          Bridge= No 
 
 
          Press ENTER to Confirm or ESC to Cancel: