ZyXEL p-660h-61 Guida Utente

Prestige 660H Series User’s Guide 

21-2 

Menu 1 General Setup 

System Name 

Choose a descriptive name for identification purposes.  This name can be 
up to 30 alphanumeric characters long.  Spaces are not allowed, but 
dashes “-” and underscores "_" are accepted.  

 

Location (optional) 

Enter the geographic location (up to 31 characters) of your Prestige. MyHouse 

Contact Person's 
Name (optional) 

Enter the name (up to 30 characters) of the person in charge of this 
Prestige. 

JohnDoe 

Domain Name 

Enter the domain name (if you know it) here. If you leave this field blank, the 
ISP may assign a domain name via DHCP. You can go to menu 24.8 and 
type "sys domainname" to see the current domain name used by your 
gateway. 

If you want to clear this field just press the [SPACE BAR]. The domain 
name entered by you is given priority over the ISP assigned domain name. 

zyxel.com.tw 

Edit Dynamic DNS  

Press the [SPACE BAR] to select Yes or No (default). Select Yes to 
configure Menu 1.1 — Configure Dynamic DNS (discussed next). 

No 

Route IP 

Set this field to Yes to enable or No to disable IP routing.  You must enable 
IP routing for Internet access.   

Yes 

Bridge 

Turn on/off bridging for protocols not supported (for example, SNA) or not 
turned on in the previous Route IP field.  Select Yes to turn bridging on; 
select No to turn bridging off.  

No 

If you have a private WAN IP address, then you cannot use Dynamic DNS. 

To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit Dynamic 
DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as shown next.  

Follow the instructions in the next table to configure Dynamic DNS parameters. 

 

 

 
                      Menu 1.1 - Configure Dynamic DNS 
 
   Service Provider= WWW.DynDNS.ORG 
   Active= No 
   Host= 
   EMAIL= 
   USER= 
   Password= ******** 
   Enable Wildcard= No 
 
 
                  Press ENTER to Confirm or ESC to Cancel: